Specification of Spring clip
2021-12-15
Under the dynamic action of train operation,each component of the spring bar must have sufficient strength and stability,so that the spring bar can ensure the train to run safely,smoothly and without interruption at the higher speed specified.
As a kind of spring bar,the E Type Clip needs to be checked carefully in the process of purchasing to ensure that the quality of the E Type Elastic Rail Clip is qualified.Then,in the purchase of typeⅲcartridge,or other kinds of Spring Clip,you can pay attention to the details to identify the quality of the E-Clip is qualified.
When selecting the New Product Spring Clip,the surface quality should be checked first.The small bend part of the spring bar is not allowed to have obvious indentation and crease.There should be no visible cracks and burrs on the surface of the spring bar.Slight indentation and burrs are allowed to be repaired with a grinding tool until the surface is smooth.There are visible cracks for unqualified products.In addition,as a cartridge manufacturer,in order to produce high-quality cartridge,it is necessary to carry out regular inspection on the machining mould of the cartridge,and replace the mould that is excessively worn.
